Seal Gen2 12.5

12V DC severe duty winch rated at 12,500 lb pulling meets or exceeds your expectations.
Heavy duty series wound motor equipped with thermal switch alters when motor over-heating.
16 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 22.5 degree increments.
Water-proof remote control with thermometric LED indicator w/5 m cord
Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
The U.S. Germany, U.K. France, etc patented mechanical cone brake outside the drum expedites heat dispersion.The greater the load on the rope, the greater amount of braking is generated by the mechanism.
Meet SAE J706, CE Machinery Directive 2006/42/EC and CE Electromagnetic Compatibility Directive 2004/108/EC.
(* Only foot forward mounting can meet SAE J706)



Specification/Part Numbers


Part number: PN 295730
Rated line pull: 5,670 kg / 12,500 lb single line
Motor: 3,730 w / 5.0 hp 12V series wound
Gear ratio: 3-stage planetary 225:1
Clutch (freespooling): Rotating ring gear
Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
Winch construction: Aluminum die cast housings with steel drum
Drum size: 63.5 x 227 x 273 mm (2.5” x 8.9” x 10.7")
Control: Waterproof remote with thermometric indicator LED w/ 5 m (17') cord
Rope type: Galvanized aircraft A7 x19 wire rope
Rope size: 9.5 mm x 25 m (3/8” x 82’)
Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
Mounting: Foot forward mounting only
Finish: Matte black powder-coated
Winch weight (including rope) : 37.7 kg / 83.1 lb
Gross weight : 53 kg / 117 lb
Box dimension, (L x D x H) : 682 x 209 x 430 mm (26.9" x 8.2" x 16.9")