Functional Shock Mount Relocation

These high-clearance mounts raise the lower shock mount a full 3" so it is flush with the bottom of the axle tube, dramatically increasing ground clearance. This weld-on mount is made from 3/16" steel and includes a new shock mount bolt that will accept any standard 5/8" (ID) shock bushing. Although designed for the XJ, this weld on mount can be used for any custom application with a tube diameter ranging from 2.5" to 3.5".

Specifications:

    3/16" steel weld on shock mount
    Can be used on almost any custom application
    Designed to mount to any standard 5/8" ID shock bushing
    Moves the rear XJ lower shock mount up 3" to be flush with the axle tube

Uwagi:

    Required shocks (specs) may change after installation due to change in mounting position