Lift your vehicle with suspension kit from TeraFlex
TeraFlex Alpine CT (Cross-Trail) suspension systems build on the Sport ST (Street &, Trail) suspension systems. A 3,5" suspension system opens up a new world of tyre sizes and off-road possibilities. If you have that "do it all" attitude, one of the 3,5” Alpine CT3 suspension systems will make it happen. The Alpine CT3 short arm features the Alpine short control arms as well as a front HD forged adjustable track bar, and front and rear track bar axle brackets for maximum tunability and flawless performance for years to come.
Adjustable Alpine Long Control Arms balance front caster and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tyre position on vehicles with 0-4,5” lifts. The Front HD Forged adjustable track bar and track bar axle bracket(s) improve steering response, center the axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling.
This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH).
Specs:
Increases ground clearance
Allows larger wheels to be fitted
Improves handling, reduces noise and vibration
Improves steering response
Provides full range of motion
Max tyre diameter:
33": Sport/Overland | (w/ 2" front &, 1" rear bump stops)
35": Sport/Overland | (w/ 3" front &, 2,5" rear bump stops)
35": Rubicon | (w/ 2" front &, 1" rear bump stops)
37": Rubicon | (w/ 2" front &, 2,5" rear bump stops)
In the box:
(2) Front upper adjustable long control arm Alpine
(2) Front lower adjustable long control arm Alpine
(2) Front coil spring
Front bump stop spacers
Front track bar relocation bracket
Front quick disconnect sway bar kit
Front adjustable track bar
(2) Rear coil spring spacer
Rear bump stop spacers
(2) Rear upper adjustable long control arm Alpine
(2) Rear lower adjustable long control arm Alpine
Rear forged sway bar kit ST
Rear driveline center support mount lowering spacer kit
Rear track bar axle bracket kit
Bracket kit for Alpine long arm
Extended-travel shock accessory kit
Coil spring retainer kit
All necessary hardware
Notes:
Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately)
Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres
Alignment required
Requires longer shocks, we recommended TeraFlex and Fox
For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately)
Requires cutting/removal of factory control arm bracketry to install Long Arm Brackets