Lift your vehicle with suspension kit from TeraFlex

TeraFlex Alpine CT (Cross-Trail) suspension systems build on the Sport ST (Street &, Trail) suspension systems. A 3,5" suspension system opens up a new world of tyre sizes and off-road possibilities. If you have that "do it all" attitude, one of the 3,5” Alpine CT3 suspension systems will make it happen. The Alpine CT3 short arm features the Alpine short control arms as well as a front HD forged adjustable track bar, and front and rear track bar axle brackets for maximum tunability and flawless performance for years to come.

Adjustable Alpine Short Control Arms balance front caster and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tyre position on vehicles with 0-4,5” lifts. The Front HD Forged adjustable track bar and track bar axle bracket(s) improve steering response, center the axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling.

This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH).

Specs:

    Increases ground clearance
    Allows larger wheels to be fitted
    Improves handling, reduces noise and vibration
    Improves steering response
    Provides full range of motion

Max tyre diameter:

    Sport/Overland Fenders: 35" (w/ 3" front &, 2,5" rear bump stops)
    Rubicon Fenders: 37" (w/ 2" front &, 2.5" rear bump stops)

In the box:

    (2) Front lower control arm Alpine
    (2) Front upper control arm Alpine
    (2) Front coil spring
    Front adjustable track bar
    Front sway bar quick disconnect kit
    Front bump stop spacers
    Front track bar relocation bracket
    Rear track bar axle bracket
    Rear forged sway bar kit
    Rear sway bar links
    Rear driveline spacer
    Rear upper control arms brackets
    Rear bump stop spacers
    Rear extended brake lines
    (2) Rear coil spring
    (2) Rear lower control arm Alpine
    (2) Rear upper control arm Alpine
    Coil spring retainer kit
    All necessary hardware

Notes:

    Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately)
    Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres
    Alignment required
    Requires longer shocks, we recommended TeraFlex and Fox
    For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately)