Lift your vehicle with suspension kit from TeraFlex

TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on the Sport ST (Street &, Trail) Suspension Systems. The 4.5" Alpine CT4 Long Arm Suspension System is engineered for the enthusiast who demands an off-road capable suspension with maximum adjustability flex durability and quiet performance. This all-inclusive system includes everything from the TeraFlex exclusive brake line anchor brackets to industry leading adjustable Alpine Long Control Arms and brackets. The Alpine CT4 is designed to flex and droop over boulders and fly across flats like nothing you have ever experienced. And like all TeraFlex lifts the highway manners of the CT4 are legendary.
Durable components

Adjustable Alpine Long Control Arms balance front caster and pinion angles as well as optimize rear pinion angles anti-squat geometry and tire position. The Front HD forged adjustable track bar and front and rear track bar axle brackets improve steering response center the axles to optimize vehicle roll center and reduce body roll for unsurpassed handling. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise vibration and harshness (NVH). Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort!

Specs:

    Increases ground clearance
    Allows larger wheels to be fitted
    Improves handling, reduces noise and vibration
    Improves steering response
    Full range of movement for off-road flex and articulation

In the box:

    Front adjustable track bar Alpine
    (2) Front coil spring
    Front track bar bracket
    (2) Front brake line anchors
    Bracket kit for Alpine long arm
    (2) Front quick disconnect sway bar kit
    (2) Front upper adjustable long control arms Alpine
    (2) Front lower adjustable long control arms Alpine
    (2) Rear upper adjustable long control arms Alpine
    (2) Rear lower adjustable long control arms Alpine
    (2) Rear coil spring
    Rear track bar bracket
    (2) Rear extended sway bar link
    Front &, rear 2" bump stop strike pad kit
    Front &, rear 0,5" bump stop strike pad shim kit
    Progressive bump stop kit Falcon
    Hardware

Notes:

    Requires aftermarket wheels w/ 4.75” backspacing or less
    Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres
    Sport/Sahara Fenders require 3” front and 2.5” rear bump stop extensions and shims (included) in order to fit 35” tyres
    Sport/Sahara Fenders require 3.5” front and 4” rear bump stop extensions and shims (included) in order to fit 37” tyres
    Rubicon Fenders require 2.5” front and 3” rear bump stop extensions and shims (included) in order to fit 37” tyres
    Alignment required
    Requires longer shocks, Falcon Performance Shocks recommended (sold separately)
    Aftermarket High Fenders required to fit 39”+ tires. Bump Stop Extension and Shim requirements will vary based on setup. Installer must check for clearances
    May require an additional 0.5” Bump Stop Strike Pad Shim Kit TX1959300 (sold separately)
    Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets