Lift your vehicle with suspension kit from TeraFlex

TeraFlex Alpine CT (Cross-Trail) suspension systems build on the Sport ST (Street &, Trail) suspension systems for maximum tunability and flawless performance.

Adjustable Alpine Short Control Arms balance front caster and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tyre position on vehicles with 0-4,5” lifts.

The Front HD Forged Adjustable Track Bar and Track Bar Axle Bracket(s) improve steering response, center the axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling.

This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH).

Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort!

Specs:

    Increases ground clearance
    Allows larger wheels to be fitted
    Improves handling, reduces noise and vibration
    Improves steering response
    Provides full range of motion
    Simple bolt-on installation

In the box:

    (2) Front coil spring
    Front track bar bracket
    (2) Front brake line anchors
    (2) Front longer sway bar links
    Front adjustable track bar Alpine
    (2) Front quick disconnect sway bar
    (2) Front lower adjustable control arm
    (2) Front upper adjustable control arm
    (2) Rear lower adjustable control arm
    (2) Rear upper adjustable control arm
    (2) Rear longer sway bar link
    Progressive bump stop kit TeraFlex Falcon
    (2) Rear coil spring
    Front and rear bump stop strike pad kit 2"
    Front and rear bump stop strike pad shim kit 0,5"
    All necessary hardware

Notes:

    Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately)
    Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres
    Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres
    Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres
    Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres
    Alignment required
    Requires longer shocks. We recommend Falcon shocks (sold separately)