Durable kit from TeraFlex

Springs are one of the most safety-critical suspension components of modern vehicles. They affect handling, roadholding and braking performance. TeraFlex springs are made of the highest quality steel, which can withstand additional loads such as steel bumpers or winches. Powder coated, finished in black, they gain corrosion resistance and retain their properties for a long time. Linear rate springs provide the maximum number of active coils under load for consistent performance and predictable handling throughout the full range of suspension travel both on- and off-road.

TeraFlex front sway bar quick disconnects are the industry leader thanks to their ease of use. The sway bar links quickly disconnect and swing up out of the way for unrestricted axle articulation during off-roading. While connected for street use, the link provides immediate reaction during sway bar loading to eliminate excess play. This results in improved lateral control and steering response compared to the stock rubber sway bar link bushings. Reduce clearance issues between the tyre and rear sway bar with the TeraFlex rear sway bar link kit with swivel stud. The sealed narrow shoulder tie rod type ball socket on the upper link maximizes tyre clearance, while the sealed ball socket on the lower link provides precise and immediate reaction during sway bar loading thus eliminating excess play.

The rear track bar bracket corrects vehicle roll center, restores factory handling, and reduces body roll in lifted JKU Wrangler Unlimited models. The exhaust spacers or the brake lines are other elements of the suspension that will work perfectly in raised vehicles.

Specs:

    The set is perfect on the road and in the field
    High quality
    Improves handling, increases driving quality

In the box:

    Front coil springs
    Front brake lines
    Front, extended sway bar disconnects
    Rear coil springs
    Track bar relocation bracket
    Rear brake lines
    Rear, extended sway bar links
    Exhaust spacer

Notes:

    Requires aftermarket wheels w/ 4.5" backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately)
    Requires longer shocks (sold separately)
    Requires front and rear track bar (sold separately)
    Requires long control arms with brackets (sold separately)
    Requires extended bump stops (sold separately)
    Requires cutting and welding
    Requires spring protection from falling out, e.g. suspension travel limit straps
    Requires alignment
    Lift height will accommodate up to 37” tyres, recommended tyre size is 35" though
    Driveshaft modifications are highly recommended with this kit