Leveling kit from TeraFlex

The ultra-simple TeraFlex JT: 2,5” Coil spring &, spacer base lift kit comes with the basic parts needed to fit larger tires for increased ground clearance for better off-road capability. The rear part of Jeep Gladiator JT vehicles equipped with the factory suspension kit is set higher than the front part. A simple solution from TeraFlex lifts the vehicle while aligning front to rear part of the car for a more effective look. This easy-to-install solution maintains the original ride quality, ensuring the car does not lose its handling characteristics. The set is additionally more resistant to corrosion thanks to the black powder finish..

Specs:

    Levels the front with the rear of the vehicle
    Maintains factory ride quality

In the box:

    (2) Front lower 2” Bump stop strike pad extensions
    (2) Front 11,5” Sway bar links
    Front 2,5” Lift coil spring kit
    (2) Rear 0,5” Lift coil spring spacers
    (4) Rear lower 0,5” Bump stop strike pad extensions
    Rear 13” Sway bar link kit (2,5–4,5” Lift)
    All necessary hardware

Notes:

    Requires longer shocks (sold separately)
    Caster correction recommended, but not required
    Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels
    Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tires
    All OEM fenders require 2” Front and 1” Rear Bump Stop Extensions to fit 35” tires
    Alignment required
    For diesel models front get 1" lift less, we recommend to use front spacer load level kit TX1155100 (sold separately)