Durable kit from TeraFlex
Springs are one of the most safety-critical suspension components of modern vehicles. They affect handling, roadholding and braking performance. TeraFlex springs are made of the highest quality steel, which can withstand additional loads such as steel bumpers or winches. Powder coated, finished in black, they gain corrosion resistance and retain their properties for a long time. Linear rate springs provide the maximum number of active coils under load for consistent performance and predictable handling throughout the full range of suspension travel both on- and off-road.
TeraFlex front sway bar quick disconnects are the industry leader thanks to their ease of use. The sway bar links quickly disconnect and swing up out of the way for unrestricted axle articulation during off-roading. While connected for street use, the link provides immediate reaction during sway bar loading to eliminate excess play. This results in improved lateral control and steering response compared to the stock rubber sway bar link bushings. Reduce clearance issues between the tyre and rear sway bar with the TeraFlex rear sway bar link kit with swivel stud. The sealed narrow shoulder tie rod type ball socket on the upper link maximizes tyre clearance, while the sealed ball socket on the lower link provides precise and immediate reaction during sway bar loading thus eliminating excess play.
The rear track bar bracket corrects vehicle roll center, restores factory handling, and reduces body roll in lifted models. Bump stop extensions will work perfectly in raised vehicles.
Specs:
The set is perfect on the road and in the field
High quality
Improves handling, increases driving quality
In the box:
(2) Front coil spring
(2) Rear coil spring
Rear track bar bracket
Bump stop extensions
All necessary hardware
Notes:
Requires aftermarket wheels with 4,5” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately)
2012–2018 JK Wrangler/Unlimited models require Exhaust Spacers TX2610000 (sold separately) or other exhaust modification for proper driveshaft clearance if front extended shock length is greater than 24.5”
Requires longer shocks (not included in base kit) – Falcon or Fox shock absorbers recommended (sold separately)
