Durable kit from TeraFlex

Springs are one of the most safety-critical suspension components of modern vehicles. They affect handling, roadholding and braking performance. TeraFlex springs are made of the highest quality steel, which can withstand additional loads such as steel bumpers or winches. Powder coated, finished in black, they gain corrosion resistance and retain their properties for a long time. Linear rate springs provide the maximum number of active coils under load for consistent performance and predictable handling throughout the full range of suspension travel both on- and off-road.

TeraFlex front sway bar quick disconnects are the industry leader thanks to their ease of use. The sway bar links quickly disconnect and swing up out of the way for unrestricted axle articulation during off-roading. While connected for street use, the link provides immediate reaction during sway bar loading to eliminate excess play. This results in improved lateral control and steering response compared to the stock rubber sway bar link bushings. Reduce clearance issues between the tyre and rear sway bar with the TeraFlex rear sway bar link kit with swivel stud. The sealed narrow shoulder tie rod type ball socket on the upper link maximizes tyre clearance, while the sealed ball socket on the lower link provides precise and immediate reaction during sway bar loading thus eliminating excess play.

The rear track bar bracket corrects vehicle roll center, restores factory handling, and reduces body roll in lifted JK models. The exhaust spacers and brake line anchor will work perfectly in raised vehicles.

Specs:

    The set is perfect on the road and in the field
    High quality
    Improves handling, increases driving quality

In the box:

    Front coil springs
    Front extended sway bar disconnects
    Rear coil springs
    Rear extended sway bar links
    Rear track bar bracket
    Brake line anchor
    Exhaust spacer

Notes:

    Requires aftermarket wheels w/ 4.5" backspacing or less – or Offset Wheel Adapters for stock wheels
    Requires longer shocks (not included in base kit) – Falcon or Fox shock absorbers recommended  (sold separately)
    Requires front, extended track bar or front track bar relocation bracket (sold separately)
    Requires extended bump stops (sold separately)
    Requires cutting
    2007-2011 models will require extended length front brake lines TX4353310 (sold separately)
    We recommend driveshaft modifications. See the TeraFlex Rzeppa high angle CV kit TX1744014 (sold separately)