Improve driving comfort with TeraFlex

Gain more control over your suspension tuning with the Falcon SP2 3.5 e-Adjust Piggyback Shocks! In addition to the 8-Position Dial, these shocks can be programmed to automatically switch from Soft to a manually preselected Firm setting depending on terrain. These Jeep-specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles as well as race-inspired performance, handling, and stability for off-road rigs.
Suspension adjustment

The Control Module’s 2-position In-Cab Switch includes Soft and Firm. Mode adjust shocks SP2 give the choice of setting the Falcon shocks base tuning to Performance or Soft/Cold. This choice is made during installation but can be changed later if so desired. You can change the mode by rotating the shaft (lower shock eye).

Modes specs:

    Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
    Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss

e-Adjust specs:

    SP2 3.5 e-Adjust Piggyback Shocks offer a wide range of adjustability for specific terrain and/or handling characteristics
    The desired Firm setting is controlled manually by the 8-Position Dial
    2-position In-Cab Switch settings include: Soft and Firm
    Manually adjusted from Soft to preset Firm setting
    SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings

Specs:

    SP2 mode adjust shocks add Soft and Performance modes
    Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
    Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss
    Work with lifts 2-4,5''
    Corner-specific shock absorber with race-inspired performance
    Smaller knob for 8 position additional hardness scale in the "select" mode
    Air Adjust Switch with 2 compression settings for large damping adjustments
    Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
    Increases vehicle stability
    2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation
    Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tires
    3/4” shaft to prevent shaft buckling
    Induction hardened chrome plated shaft resists rock damage and corrosion
    Oil - Gas separator prevents cavitation
    1-piece Teflon piston
    Red Line full synthetic shock oil with high viscosity index to work in all temperatures
    Synthetic formula also contains special anti-wear and lubricity
    1,000-hour salt spray corrosion resistance test on all hardware
    Built in-house at the TeraFlex Falcon Shock Division

In the box:

    (4) Shock absorbers - Falcon 3.5 e-Adjust
    (2) Rear roost guards
    All necessary hardware

Notes:

    Fits petrol engine models ONLY
    May require bump stop strike pad extension kit
    Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders
    For Jeep JL 4XE requires speaker relocation kit TX36-07-02-100 (sold separately)
    Fits Rubicon 392 models