Improve driving comfort with TeraFlex

Gain more control over your suspension tuning with the Falcon SP2 3.5 aDAPT e-Adjust Piggyback Shocks! In addition to the 8-Position Dial, these shocks can be programmed to automatically switch from Soft to a manually preselected Firm setting depending on terrain. These Jeep-specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles as well as race-inspired performance, handling, and stability for off-road rigs.
Suspension adjustment

The aDAPT Control Module’s 3-position In-Cab Switch includes Soft, Firm, and Auto settings. Mode adjust shocks SP2 give the choice of setting the Falcon shocks base tuning to Performance or Soft/Cold. This choice is made during installation but can be changed later if so desired. You can change the mode by rotating the shaft (lower shock eye).

Modes specs:

    Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
    Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss

aDAPT e-Adjust specs:

    SP2 3.5 aDAPT e-Adjust Piggyback Shocks offer a wide range of adjustability for specific terrain and/or handling characteristics
    In Auto Setting, the aDAPT Control Module automatically switches from Soft to a manually preselected Firm setting based on driver selectable minimum “G” threshol
    The desired Firm setting is controlled manually by the 8-Position Dial
    aDAPT Control Module adjustment parameters: forward acceleration, lateral acceleration, braking
    3-position In-Cab Switch settings include: Soft, Firm, Auto
    Can also be manually adjusted from Soft to preset Firm setting
    Using the Falcon App, multiple presets can be created and used for different driving conditions
    SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings

Specs:

    Fast adjust knob with 3 basic positions: soft, select, firm
    SP2 mode adjust shocks add Soft and Performance modes
    Corner-specific shock absorber with race-inspired performance
    Smaller knob for 8 position additional hardness scale in the "select" mode
    Air Adjust Switch with 2 compression settings for large damping adjustments
    Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
    Increases vehicle stability
    2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation
    Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tyres, 3/4” shaft to prevent shaft buckling
    Induction hardened chrome plated shaft resists rock damage and corrosion
    Oil - Gas separator prevents cavitation
    1-piece Teflon piston
    Red Line full synthetic shock oil with high viscosity index to work in all temperatures
    Synthetic formula also contains special anti-wear and lubricity
    1,000-hour salt spray corrosion resistance test on all hardware

In the box:

    (4) Shock absorber Falcon 3.5 aDapt e-Adjust
    (2) Rear roost guard
    Hardware

Notes:

    Fit with petrol engine ONLY
    May require bump stop strike pad extension kit
    Bump stop configuration varies depending on shock absorber collapsed length, tyre size, and fenders