Improve driving comfort with TeraFlex
Gain more control over your suspension tuning with the Falcon SP2 3.5 e-Adjust Piggyback Shocks! In addition to the 8-Position Dial, these shocks can be programmed to automatically switch from Soft to a manually preselected Firm setting depending on terrain. These Jeep-specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles as well as race-inspired performance, handling, and stability for off-road rigs.
Suspension adjustment
The Control Module’s 2-position In-Cab Switch includes Soft and Firm. Mode adjust shocks SP2 give the choice of setting the Falcon shocks base tuning to Performance or Soft/Cold. This choice is made during installation but can be changed later if so desired. You can change the mode by rotating the shaft (lower shock eye).
Modes specs:
Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss
e-Adjust specs:
SP2 3.5 e-Adjust Piggyback Shocks offer a wide range of adjustability for specific terrain and/or handling characteristics
The desired Firm setting is controlled manually by the 8-Position Dial
2-position In-Cab Switch settings include: Soft and Firm
Manually adjusted from Soft to preset Firm setting
SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings
Specs:
SP2 mode adjust shocks add Soft and Performance modes
Corner-specific shock absorber with race-inspired performance
Smaller knob for 8 position additional hardness scale in the "select" mode
Air Adjust Switch with 2 compression settings for large damping adjustments
Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
Increases vehicle stability
2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation
Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tyres, 3/4” shaft to prevent shaft buckling
Induction hardened chrome plated shaft resists rock damage and corrosion
Oil - Gas separator prevents cavitation
1-piece Teflon piston
Red Line full synthetic shock oil with high viscosity index to work in all temperatures
Synthetic formula also contains special anti-wear and lubricity
1,000-hour salt spray corrosion resistance test on all hardware
In the box:
(4) Shock absorber Falcon SP2 3.5 e-Adjust Piggyback
(2) Rear roost guard
Hardware
Notes:
Fit with petrol engines ONLY
May require bump stop strike pad extension kit
Bump stop configuration varies depending on shock absorber collapsed length, tyre size, and fenders