Improve driving comfort with TeraFlex

Gain more control over your suspension tuning with the Falcon SP2 3.5 e-Adjust Piggyback Shocks! In addition to the 8-Position Dial, these shocks can be programmed to automatically switch from Soft to a manually preselected Firm setting depending on terrain. These Jeep-specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles as well as race-inspired performance, handling, and stability for off-road rigs.
Suspension adjustment

The Control Module’s 2-position In-Cab Switch includes Soft and Firm. Mode adjust shocks SP2 give the choice of setting the Falcon shocks base tuning to Performance or Soft/Cold. This choice is made during installation but can be changed later if so desired. You can change the mode by rotating the shaft (lower shock eye).

Modes specs:

    Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
    Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss

e-Adjust specs:

    SP2 3.5 e-Adjust Piggyback Shocks offer a wide range of adjustability for specific terrain and/or handling characteristics
    The desired Firm setting is controlled manually by the 8-Position Dial
    2-position In-Cab Switch settings include: Soft and Firm
    Manually adjusted from Soft to preset Firm setting
    SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings

Specs:

    SP2 mode adjust shocks add Soft and Performance modes
    Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
    Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss
    Work with lifts 2-4,5''
    Corner-specific shock absorber with race-inspired performance
    Smaller knob for 8 position additional hardness scale in the "select" mode
    Air Adjust Switch with 2 compression settings for large damping adjustments
    Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
    Increases vehicle stability
    2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation
    Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tires
    3/4” shaft to prevent shaft buckling
    Induction hardened chrome plated shaft resists rock damage and corrosion
    Oil - Gas separator prevents cavitation
    1-piece Teflon piston
    Red Line full synthetic shock oil with high viscosity index to work in all temperatures
    Synthetic formula also contains special anti-wear and lubricity
    1,000-hour salt spray corrosion resistance test on all hardware

In the box:

    (4) Shock absorber Falcon SP2 3.5 e-Adjust Piggyback
    (2) Rear roost guard
    Hardware

Notes:

    Fit with petrol engines ONLY
    May require bump stop strike pad extension kit
    Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders