Improve driving comfort with TeraFlex

“High-Value Performance" is the driving force behind our vehicle-specific dampers for Jeeps, trucks, and SUVs. These Jeep-specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily-driven vehicles as well as race-inspired performance, handling, and stability for off-road rigs. Falcon Performance Shocks by TeraFlex.
Suspension adjustment

Falcon SP2 3.3 Fast Adjust Piggyback Shocks offer a wide range of adjustability with their easy-to-use 3-position Fast Adjust Knob. Settings include Soft, Custom, and Firm. The Custom setting incorporates an 8-Position Dial for more precise adjustment.

Additionally SP2 Mode lets you adjust between soft and performance preset before shock installation:

Modes specs:

    Soft allows a partial bypass of the main piston and is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
    Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss

Specs:

    Provide increased stability and better ride quality
    Adapted for everyday driving and rough terrain

Falcon SP2 3.3 Fast Adjust Piggyback specs:

    Fast Adjust Knob w/ 3 compression settings for large damping adjustments
    Settings include: Soft, Custom, Firm
    Custom setting includes an 8-Position Dial for finer damping adjustments
    SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings at install
    Piggyback design increases oil and gas capacity for reduced heat
    Flows 6x more oil than restrictive reservoir hose designs
    Eliminates common leakage issues found in banjo and swivel fittings
    Front shocks' unique horizontal piggyback reservoir increases tyre clearance

Falcon Performance Shocks (All):

    2.3" shock body provides optimal performance
    6061-T6 aluminum alloy shock body resists Impact to protect internal components
    Smooth honed internal shock body surface for long-term performance
    3/4" induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling
    1-piece Teflon bronze piston wear band w/ O-ring
    Hard anodized 6061-T6 aluminum alloy billet piston
    VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up and increased damping volume
    VOD reduces shock bottoming at full compression or over uneven terrain
    OGS (Oil/Gas Separator) prevents cavitation
    High-viscosity, full synthetic Red Line shock oil for consistent performance across all temperatures
    Synthetic formula also contains special anti-wear and lubricity agents
    1,000-hour salt spray corrosion resistance test on all hardware
    Designed, engineered, and assembled in-house from domestic and globally sourced components

In the box:

    (2) Front shock absorber Falcon SP2 3.3 Fast Adjust Piggyback
    (2) Rear shock absorber Falcon SP2 3.3 Fast Adjust Piggyback
    Hardware

Notes:

    Bump stop configuration varies depending on shock absorber collapsed length, tyre size, and fenders