Our self made rear door protection prevents from the situation where an unauthorised person can open the car freely. It is made of the top quality 3 mm thick stainless steel that is well polished in the process, which results in a clean surface with no rough edges, therefore it is safe and handy for the customer to install it by himself.

The mounting does not require any type of drilling as the door lock is mounted using the original screws. This additional security is blocked from the inside with a folding pin.

Our rear and driver's door anti-theft protection prevents from getting under the door handle cover by an unauthorised person from the outside of the vehicle. It is no longer possible.

Our anti-theft protection is made of high-quality stainless steel which is completely burr-free (no rough edges around the corners) therefore the installation is completely safe for everyone.

The plate itself must be attached to the inside part of the door. To do this, remove the door panel and mount the protection with the help of screws that came with the original door handle. This makes the kit invisible from the outside. You don't need any additional materials at all.

Important note: the anti-theft protection is only necessary for the driver's and the rear door of the vehicle. The passenger side and the sliding door do not have a cylinder mechanism, therefore they are not targeted by thiefs, as it it almost impossible for them to break in.

Our stainless steel AdBlue tank lock anti-theft protection prevents from access by unauthorized person. It might also save you a couple of costly repairs. The AdBlue filler cap on the Fiat Ducato, Citroën Jumper and Peugeot Boxer do not have a original lock nor protection, just a standard  diesel cap, therefore  everyone has got free access to your AdBlue tank, while you are not there.

It is made of the top quality 3 mm thick stainless steel that is well polished in the process, which results in a clean surface with no rough edges, therefore it is safe and handy for the customer to use it.

Suitable for vehicles with H1, H2 and H3 roof:

Fiat Ducato: from 2006

Citroën Jumper: from 2006

Peugeot Boxer: from 2006

Opel Movano C: from 2021*