The inverters allow powering domestic equipment - requiring 230V/120V AC - using 12V, 24V or 48V DC "leisure" or "automotive" batteries.


Features


VE.Direct communication port


The VE.Direct port can be connected to:


    A computer (VE.Direct to USB interface cable required).
    Apple and Android smartphones, tablets, MacBooks and other devices (VE.Direct Bluetooth Smart dongle required)


Fully configurable:


    Battery low voltage alarm trigger and reset levels.
    Low battery voltage disconnection and restart levels
    Dynamic disconnection: load-dependent disconnection level
    Output voltage 210 - 245V
    Frequency 50 Hz or 60 Hz
    ECO mode activation/deactivation and ECO mode detection level.


Monitoring:


    Input and output voltage, % load and alarms.


Proven reliability


The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, either due to overload or high ambient temperature.


High starting power


Necessary for starting loads such as power converters for LED lamps, halogen lamps or power tools.


ECO mode


When in ECO mode, the inverter switches to standby mode when the load drops below a preset value (minimum load: 15 W). Once in standby mode, the inverter will switch on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on.


Remote on/off


A remote on/off switch can be connected to a two-pole connector, or between the battery plus and the left contact of the two-pole connector.


DC connection with screw terminals


No special tools are required for installation.