Inverter isolated VICTRON Phoenix VE.Direct Schuko 12V / 800VA. Victron Phoenix inverters allow powering 230V/120v AC domestic equipment with batteries.


Features:


VE.Direct communication port.


The VE.Direct port can be connected to:


- A computer (VE.Direct to USB interface cable required).

- Apple and Android smartphones, tablets, Mackbooks and other devices (VE.Direct to Bluetooth Smart dongle required).



Fully configurable


Alarm trigger levels and low battery voltage reset.

Low battery voltage shutdown and reset levels.

Output voltage 210 - 245V.

Frequency 50 Hz or 60 Hz.

ECO mode on/off and ECO mode level sensor.

Monitoring: Input/output voltage and current alarms.


Proven reliability


The full bridge plus toroidal transformer topology has proven its reliability over many years.

many years.

The inverters are short-circuit proof and protected against overheating, whether due to overload or overheating.

overload or high ambient temperature.


High starting power


Necessary for starting loads such as converters for LED lamps, halogen lamps or power tools.



ECO mode


In ECO mode, the inverter will go into standby when the load drops below a preset value. Once in standby, the inverter will be activated briefly (adjustable; default: every 2.5 seconds). If the load exceeds the preset level, the inverter will remain on.


Remote on/off switch


A remote On/Off switch can be connected to a two-phase connector or between the battery positive and the left contact of the two-phase connector.


LED diagnostics.