Phoenix Inverter 12V 375VA VE.Direct Shuko
Phoenix inverters are built to last
Phoenix 12/375 VE.Direct Shuko inverters allow you to power 230V/120V AC household equipment with automotive or service batteries rated at 12V DC. Phoenix inverters are designed to last. With a sophisticated full bridge plus toroidal transformer topology, they are ideal for maintaining delicate electronic devices. They are protected against overloads, high temperatures and short circuits.



Phoenix Inverters Built for years to come for high reliability
Full peak power delivery with the Phoenix 12V 375VA VE.Direct Shuko inverter.
Electrical devices, particularly those with an electric motor, demand strong and brief power peaks during start-up that are far in excess of their normal nominal consumption. No problem: the peak power capability of the Phoenix inverter is the market leader.

Full control with intelligent alarms, shutdowns and restarts
Excessive power demand during start-up can trigger alarms or false shutdowns. The Phoenix 12V 250VA VE.Direct Shuko inverter takes this into account and will only shut down the device if the overload is persistent. Intelligently, device shutdowns will be followed by a series of restarts to eliminate false alarms.

 
User adjustable values
The Phoenix 12/375 VE.Direct Shuko inverter has a communications port that provides access to status information, alarms, and user-adjustable undervoltage shutdown. The shutdown will be followed by a series of intelligent restart attempts. User adjustable values can be accessed with computer or mobile device via VictronConnect, our free app.

VE.Direct communication port
The VE.Direct port of the Phoenix 12/375 VE.Direct Shuko inverter can be connected to:

A computer (VE.Direct to USB interface cable required).
Apple and Android smartphones, tablets, mackbooks and other devices (VE.Direct to Bluetooth Smart dongle required).

Fully configurable
Alarm trigger levels and low battery voltage reset.
Low battery voltage shutdown and reset levels.
Dynamic disconnection on Phoenix 12/375 VE.Direct Shuko inverter: load-dependent disconnection level.
Output voltage 210 - 245V
Frequency 50 Hz or 60 Hz
ECO mode on/off and ECO mode level sensor

Phoenix 12/375 VE.Direct Shuko inverter monitoring
Input/output voltage and current, % load and alarms

Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years.
many years.
Phoenix 12/375 VE.Direct Shuko inverters are short-circuit proof and protected against overheating, either due to overload or overheating.
overload or high ambient temperature.
High starting power
Necessary for starting loads such as converters for LED lamps, halogen lamps or power tools.

ECO mode
In ECO mode, the Phoenix 12/375 VE.Direct Shuko inverter will go into standby when the load drops below a preset value (minimum load: 15W). Once in standby, the inverter will activate briefly (adjustable; default: every 2.5 seconds). If the load exceeds the preset level, the inverter will remain on.


Remote on/off switch
A remote On/Off switch can be connected to a two-phase connector or between the battery positive and the left contact of the two-phase connector on the Phoenix 12/375 VE.Direct Shuko inverter.


LED Diagnostics on the Phoenix 12/375 VE.Direct Shuko Inverter
Please refer to the manual for its description.
For transferring the load to another AC source: the automatic transfer switch
For our lower power inverters we recommend our Filax automatic transfer switch.
Filax automatic transfer switch. The switching time of the "Filax" is very short (less than 20 milliseconds), so that computers and other electronic equipment
computers and other electronic equipment will continue to operate without interruption.