Built for off-road modifications
Product from OFD improves your car's off-road behavior, busting myths related to the discomfort and hardness of polyurethane suspension bushings, while maintaining the rigidity and characteristics of the system with weight increased by modifications. The hardness of the OFD bushings is adjusted to handle the extra weight, so the suspension and steering work properly and the life of all components is increased. The kit replaces the factory bushings, which may prove to be too soft. Set also includes two bushings fitted especially to the rear Panhard rod - an hourglass style bushing at one end and cotton reel style bushing for the other end, both with a diameter of 40 mm.
Polyurethane construction
High-quality polyurethane bushings from OFD, are a great replacement for rubber factory parts. They will improve the handling of your car and increase the stiffness only where needed. Suspension geometry will remain set throughout the whole wheel travel in any given situation. They are oil resistant, can withstand solvents, gasoline and 10% acid solutions well. By investing in polyurethane bushings, you increase comfort and safety on the road and can extend life of your suspension.
Specs:
Designed to adjust suspension to increased weight
Improve driving comfort and safety
Absorb vibrations
Resistant to environmental factors
In the box:
Front upper control arms' bushings
(4) Polyurethane bushing
(4) Inner sleeve
Front lower control arms' bushings
(4) Polyurethane bushing
(4) Inner sleeve
Front Panhard rod's bushings
(2) Polyurethane bushing
(2) Inner sleeve
(2) Washer
Rear Panhard rod's bushings
(2) Polyurethane bushing
(2) Inner sleeve
(2) Washer
Notes:
Proper installation requires the use of generous amounts of silicone-based grease with a PTFE additive. We do not recommend using any lithium or molly-based grease as they tend to dry out the polyurethane resulting in cracks and premature wear
Fits only:
73 Series Land Cruiser 1990-1999
70 Series Land Cruiser Prado 1988-1996
