NAS/Wolf 95mm Defender Rear LED Lamps

The popular 95mm diameter NAS (North American Specification) or Wolf Defender tail-lamps with LED illumination in clear SVX style or coloured lens options.

*Defender LED Stop/Tail and Indicator/Turn Signal lamps are sold as pairs and can be purchased with or without plinths.

*Defender LED Indicator/Turn Signal are sold as pairs and can be purchased with or without plinths. Indicator lamp prices include loading modules.

*Defender LED Fog and Reverse lamps are sold individually and can be purchased with or without plinths.

*The Fog LED and Reverse LED lamps will fit directly onto the original (round 95mm) Fog & Reverse plinths fitted to post ‘99 Defender models.
All of our Defender 95mm LED lamps will replace OE NAS lamps and fit onto the OE NAS plinths.

One of the benefits of using our OE spec’ LED lamps are their superior lens optics and LED output that outperform cheaper LED lamps. Notice how the Defender LED tail-lamps greater LED count displays a very distinct light pattern unlike cheaper LED lamps that contain fewer LED’s making the individual LED units clearly visible even when they're switched off.

All of our mounting plinths are Land Rover OE Genuine Parts. These will screw into the existing tail-lamp fixing holes so there is no need to drill extra holes in your bodywork.

*All of our Defender LED lamps will fit directly onto the OE fitment round plinths used on NAS trucks and the later model Defenders fitted with round (95mm diam) fog and reverse lamps. All lamps are available to buy with or without plinths.

The rear face of the OE plinths are fitted with a foam gasket to protect your paintwork and seal against water ingress.

Defender LED Indicator/Turn Signals are supplied with loading modules to overcome the fast flash characteristic when replacing conventional lamps with LED lamps. We do not supply replacement LED relays. We use the compatible loading modules supplied by the manufacturer of the lamps. Loading modules (one per indicator) need to be connected into the indicator circuit (two-wires) but unlike LED flasher relays the benefit of loading modules is that they retain the trailer warning lamp function and the factory flash rate.

All of the Defender LED lamps are supplied pre-wired with the correct connectors compatible with the Defender wiring harness fr0m 300Tdi onwards.
We can supply compatible female connectors for 200Tdi and earlier models (and the pre ‘99 rectangular fog & Reverse lamps) on request.

LED Number/License Plate Lamp

LED Number/License Plate Lamp

Note that Land Rover does not include LED indicators on any of its Limited Edition models. We can supply owners with a pair of LED indicator/turn signals that will match exactly your current LED Defender rear lamps. The  Defender Clear LED indicators will fit straight onto the OE lamp plinths and perfectly compliment your existing clear LED lamps.

Please note that indicator/turn signals on all Limited Edition models are inboard of their usual mounting location as illustrated below.