This low-profile flat deck Slimsport rack has a load-carrying area of 2666mm (105") x 1383mm (54.4").
    The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
    The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
    Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket.
    Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small – by Front Runner for most Front Runner side mount accessories (sold separately).
    Included in the Toyota Sequoia (2023-Current) Slimsport is a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately), and allows full operation of the moon roof.
    Fitment guide and all mounting hardware included.
    6"/T30 Torx Allen Key for Slimsport Rack is required for installation.a    This low-profile flat deck Slimsport rack has a load-carrying area of 2666mm (105") x 1383mm (54.4").
    The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
    The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
    Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket.
    Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small – by Front Runner for most Front Runner side mount accessories (sold separately).
    Included in the Toyota Sequoia (2023-Current) Slimsport is a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately), and allows full operation of the moon roof.
    Fitment guide and all mounting hardware included.
    6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
    The middle and rear mounting feet utilize the factory fixing points. Front mounting feet do not require drilling when installed with the included No Drill kit, but hardware is included for the drill & bolt option (recommended).
    Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
    All Front Runner Racks are backed by a Limited Lifetime Warranty*

KSTS003T - Toyota Sequoia(2023-Cur) Slimsport Roof Rack Kit Lightbar Ready

Consisting of:
1x KSTS001 - Toyota Sequoia (2023 - Current) Slimsport Tray
1x RRAC286 - Toyota Sequoia(23-cur)Slimsport rack 40" lightbar wind faring

Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel

Assembled Rack Kit Dimensions:
2666mm (105“) L x 1383mm (54.4“) W x 196mm (7.7“) H

Approximate Installed Weight: 45.45kg (100.2lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.

Shipping Dimensions:
Width: 270mm (11")
Length: 1700mm (67")
Height: 325mm (13")

Shipping Weight:
Weight: 47kg (103lbs)

    The middle and rear mounting feet utilize the factory fixing points. Front mounting feet do not require drilling when installed with the included No Drill kit, but hardware is included for the drill & bolt option (recommended).
    Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
    All Front Runner Racks are backed by a Limited Lifetime Warranty*

    Compatible with the Toyota HiAce LWB (2019-Current) vans with a vehicle length of 5265mm / 207.3".
    Load-carrying area: 2973mm (117") x 1535mm (60.4").
    Eight (8) Mounting Feet secure into van's existing factory mounting points.
    Included Slat Bracket can be inverted for a lower profile at 115mm (4.5") height, or left in standard configuration at 163mm (6.4").
    Compatible with most Front Runner side mount accessories.
    Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
    Fitment guide and all mounting hardware are included. No drilling or modification required.
    All Front Runner racks are backed by a limited lifetime warranty.*

KVTH001T - Toyota HiAce LWB (2019-Current) Slimpro Van Rack

Consisting of:
2x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm
2x FAVF006 - Volkswagen Crafter Van Rack Foot Set / 90mm
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
1x RRAC978 - Toyota HiAce LWB(2019-Curr)SlimPro Van Rack Spacer
4x RRNS1425 - Narrow Slat / 1425mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT004 - Van Rack Side Profile / 1762mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip

Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel

Assembled Rack Kit Dims:
2973.8mm (L) x 1535mm (W) x 162.8mm (H)

Approximate Installed Weight: 30.47kg (67.17lbs)

Shipping Dimensions:
Width: 450mm (18")
Length: 1770mm (70")
Height: 185mm (7")

Shipping Weight:
Weight: 38.16kg (84lbs)