This low-profile flat deck Slimsport rack has a load carrying area of 1999mm (78.7") x 1151mm (45.3").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.\
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small – by Front Runner for most Front Runner side mount accessories (sold separately).
Included is the Subaru Outback GEN 6 40" Light Bar Wind Fairing (RRAC328) has a cutout to allow the use of the Front Runner 40” LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Sunroof fully operational in slide open and closed mode.
Note: Sunroof not operational in vent / tilt mode.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KSSO005T - Subaru Outback GEN 6 (2020-Current) Slimsport Roof Rack Kit / Lightbar Ready
Consisting of:
1x KSSO002 - Subaru Outback GEN 6 (2020-Current) Slimsport Tray
1x RRAC328 - Subaru Outback gen 6 (20-Curr)Slmsprt 40" lgt bar
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Dimensions:
1999mm (78.7") L x 1151mm (45.3") W x 137mm (5.4") H
Approximate Installed Weight: 33.13kg (73.04lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1700mm (67")
Height: 220mm (9")
Shipping Weight:
Weight: 35kg (77lbs)