All Front Runner Roof Rack kits come with installation instructions as well as all the components required to fit the Slimline II to your vehicle.

Note: Your vehicle must be equipped with factory raised rails in order to use this roof rack kit.

This kit can be removed leaving the roof of your vehicle and the roof rails in their original condition.

For a stronger load carrying solution, Front Runner offers a specific rail system to install the roof rack on your vehicle. Front Runner rails are installed by removing the factory rails or used if you do not have rails installed.

The factory rail kits are designed as a "light" duty solution. Please consult your vehicle owner's manual for the manufacturer's recommended load capacity and do not exceed these limits.

For optimum load capacity, we recommend that there is no load overhang (excluding sports equipment) and that all weight is distributed evenly across the roof rack.

The factory rail sets are not suitable for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your purpose.

Please contact us for advice on mounting solutions specific to your vehicle and use.

Note: The load for factory rail shelf kits should not exceed 88 lbs or 40 kg, and ensure that the load is evenly distributed.
KRVT009T- Slimline II roof rack for Volkswagen Tiguan (2016-present) rails - by Front Runner.

Consisting of:
2 x GOFR001 Base for rail (pair) - from Front Runner
2 x GOFR013 External flush rail brackets / No 4 - from Front Runner
2 x GOFR035 Flush Rail Grips Internal / F - from Front Runner
1 x RRSTA07 Slimline Tray II 1165mm (W) x 1358mm (L) - from Front Runner
1 x WDST011 Wind deflector lip 20mm / 1165mm(W) - from Front Runner

Materials used:
Black epoxy powder coated T6 aluminium
High strength steel

Approximate installation weight:21kg (46lbs)

The standard 8mm screw fits into the T-slot located at the top and bottom of the plate.

To determine the approximate height from the roof of your vehicle to the top of the Slimline II bar, you need to add the height of the Slimline II tray (50mm/ 2") to the height of the foot, Grab-On foot or Strap-On foot listed above.

If the Slimline II bar requires feet, you must add the height of the Slimline II tray (50mm/ 2") to the height of the foot to determine the height of the bar from the rain gutter.

If the bar needs attachment rails, you need to add the height of the Slimline II tray (50mm/ 2") to the height of the attachment rails to determine the height of the bar from the highest point of the vehicle roof.

Dimensions as shipped:
Width: 455mm (18")
Length: 1610mm (63")
Height: 285mm (11")

Shipping Weight:
Weight: 24.3kg (53.5lbs)