All Front Runner Roof Rack kits come with installation instructions as well as all the necessary components to mount the Slimline II on your vehicle.

Note: Your vehicle must have factory/OEM installed flush rails in order to use this roof rack.

This roof rack kit can be removed leaving your vehicle's roof and flush rails in their original condition.

For a stronger cargo carrying solution, Front Runner offers a specific attachment rail system to install the roof rack on your vehicle. Front Runner's mounting rails can be installed by removing the factory flush rails or if no rails are installed.

All Front Runner roof racks are backed by a limited lifetime warranty*.

Factory rail kits are designed as a "light" duty solution. Please refer to your vehicle owner's manual for the manufacturer's recommended load capacity and do not exceed these limits.

For optimum load capacity, we recommend that there is no load overhang (excluding sport equipment) and that all weight is distributed evenly across the roof rack.

Factory rail sets are not suitable for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your purpose.

Please contact us for advice on mounting solutions specific to your vehicle and use.

Note: The load for factory rail rack kits should not exceed 88 lbs or 40 kg, and ensure that the load is evenly distributed.
RSS001T - Slimline II roof rack for Suzuki SX4 (2013-current) - by Front Runner.

Consists of:
2 x GOFR001 Rail base feet (pair) - from Front Runner.
2 x GOFR014 External flush rail grips / No 6 - from Front Runner
2 x GOFR035 Internal flush rail clamps / F - from Front Runner
1 x RRSTD04 1255mm (W) x 752mm(L) Slimline II Rack - from Front Runner

Materials used:
Black epoxy powder coated T6 aluminum.
High strength steel

Approximate installed weight: 16kg (36lbs)

The standard 8mm bolt fits into the T-slot located at the top and bottom of the plate.

To determine the approximate height from the roof of your vehicle to the top of the Slimline II bar, you need to add the height of the Slimline II tray (50mm) to the height of the foot, Grab-On foot or Strap-On foot listed above.

If the Slimline II bar requires feet, you must add the height of the Slimline II tray (50mm) to the height of the foot to determine the height of the bar from the rain gutter.

If the bar needs attachment rails, you need to add the height of the Slimline II tray (50mm) to the height of the attachment rails to determine the height of the bar from the highest point of the vehicle roof.

Dimensions shipped:
Width: 450mm (18 ")
Length: 1615mm (64")
Height: 140mm (6")

Shipping weight:
Weight: 19.1kg (42.1lbs)