This full size roof rack kit that fits on top of the cargo box of your Jeep Gladiator when installed with an EGR RollTrac roll top cover. This Slimline II roof rack kit contains the Slimline II tray (1345mm x 1358mm) and 6 roll top cover legs that fit into the existing EGR RollTrac channels.


All Front Runner roof rack kits contain installation instructions as well as all the necessary components to install the Slimline II roof rack on your vehicle.


All Front Runner roof racks are backed by a limited lifetime warranty*.
KRRT044T- Slimline II Cargo Box Roof Rack with EGR RollTrac Cover for Jeep Gladiator (2020-present) - from Front Runner.


Consists of:

3 x LASS028 Mounting feet for cargo box cover - from Front Runner

1 x RRSTG07 Slimline II tray 1345mm (width) x 1358mm (length) - from Front Runner.


Materials used:

Black epoxy powder coated T6 aluminum.

High strength steel


Approximate Installation Weight: 28.55kg (62.94lbs)


The standard 8mm screw fits into the T-slot located at the top and bottom of the plate.


To determine the approximate height from the roof of your vehicle to the top of the Slimline II bar, you need to add the height of the Slimline II tray (50mm/ 2") to the height of the foot, Grab-On foot or Strap-On foot listed above.


If the Slimline II bar needs feet, you must add the height of the Slimline II tray (50mm/ 2") to the height of the foot to determine the height of the bar from the rain gutter.


If the bar needs attachment rails, you need to add the height of the Slimline II tray (50mm/ 2") to the height of the attachment rails to determine the height of the bar from the highest point of the vehicle roof.


Shipping Dimensions:

Width: 440mm (17")

Length: 1730mm (68")

Height: 240mm (9")


Shipping Weight:

Weight: 28.8kg (63lbs)