This full size 1358mm/53.5" Slimline II roof rack kit contains the Slimline II tray, wind deflector and 3 pairs of grip feet to install the Slimline II to the flush rails of your Range Rover (L405). This kit installs easily with the feet that grip over the existing factory flush rails. No drilling is required.

All Front Runner Roof Rack kits come with installation instructions as well as all the components necessary to mount the Slimline II to your vehicle.

Note: Your vehicle must have factory/OEM installed flush rails in order to use this roof rack.

This roof rack kit can be removed leaving your vehicle's roof and flush rails in their original condition.

For a stronger load carrying solution, Front Runner offers a specific fixing rail system to install the roof rack on your vehicle. Front Runner fixing rails can be installed by removing the factory flush rails or if no rails are installed.

All Front Runner roof racks are backed by a limited lifetime warranty*.

Factory rail kits are designed as a "light" duty solution. Please refer to your vehicle owner's manual for the manufacturer's recommended load capacity and do not exceed these limits.

For optimum load capacity, we recommend that there is no load overhang (excluding sports equipment) and that all weight is distributed evenly across the roof rack.

The factory rail sets are not suitable for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your purpose.

Please contact us for advice on mounting solutions specific to your vehicle and use.

Note: The load for factory rail shelf kits should not exceed 88 lbs or 40 kg, and ensure that the load is evenly distributed.
KRRR009T -Slimline II Roof Rack for Land Rover Range Rover (2013-present) rails - by Front Runner

Consists of:
3 x GOFR001 Rail base feet (pair).
3 x GOFR014 External flush rail grips / No 6
3 x GOFR035 Internal flush rail clamps / F
4 x RRAC904 Spacer for rail base / 10mm (pair)
1 x RRSTG07 Slimline II Tray 1345mm (W) x 1358mm(L)
1 x WDST009 Wind deflector lip 20mm / 1345mm (width).

Materials used:
Black epoxy powder coated T6 aluminium.
High strength steel

Approximate installed weight:28.34kg (62.48lbs)

The standard 8mm bolt fits into the T-slot at the top and bottom of the plate.

To determine the approximate height from the roof of your vehicle to the top of the Slimline II bar, you need to add the height of the Slimline II tray (50mm) to the height of the foot, Grab-On foot or Strap-On foot listed above.

If the Slimline II bar requires feet, you must add the height of the Slimline II tray (50mm) to the height of the foot to determine the height of the bar from the rain gutter.

If the bar requires fixing rails, you need to add the height of the Slimline II tray (50mm) to the height of the fixing rails to determine the height of the bar from the highest point of the vehicle roof.

Shipping dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 170mm (7")

Package Weight:
Weight: 28.46kg (63lbs)