This 2312mm (91") long Slimline II set for Mercedes-Benz Sprinter (2006+) contains two Slimline II trays, wind deflector, rail set and 12 mounting feet (6 per tray). Drilling is necessary for installation. Fits "high roof" option only / Does not fit on "standard/low roof".
All Front Runner Roof Rack kits come with installation instructions as well as all the components required to fit the Slimline II to your vehicle.
All Front Runner Roof Racks are backed by a limited lifetime warranty*.
For more information on installation, please refer to the instructions under the INSTALL tab.
Note: Fits Mercedes-Benz Sprinter 2nd Generation (906) and 3rd Generation (907/910) models.
KRMS006T - Slimline II 1/2 /High Roof Rack for Mercedes Benz Sprinter 128"/144"/170" / L1/L2/L3 / SWB/MWB/LWB Wheelbase without OEM Tracks (2006-present) - by Front Runner
Consisting of:
6 x FASS025 Foot set / 60mm - 70mm
2 x RRSTM06 - Slimline II tray - 1475mm (width) x 1156mm(length)
1 x TRMS001 - Mercedes Sprinter (2006 - current) rails/ 3082mm-4098mm(length)
1 x WDST009 - 20mm wind deflector per pair width/ 1345m (width).
Materials used:
Black epoxy powder coated T6 Aluminium
High strength steel
Approximate installed weight: 54kg (119lbs)
The standard 8mm bolt fits into the T-slot at the top and bottom of the plate.
To determine the approximate height from the roof of your vehicle to the top of the Slimline II bar, you need to add the height of the Slimline II tray (50mm) to the height of the foot, Grab-On foot or Strap-On foot listed above.
If the Slimline II bar requires feet, you must add the height of the Slimline II tray (50mm) to the height of the foot to determine the height of the bar from the rain gutter.
If the bar needs fixing rails, you have to add the height of the Slimline II tray (50mm) to the height of the fixing rails to determine the height of the bar from the highest point of the vehicle roof.
Shipping dimensions:
Width: 455mm (18")
Length: 1800mm (71")
Height: 260mm (10")
Shipping Weight:
Weight: 63.1kg (138.9lbs)
