Improve performance in any terrain

Pull out all of the stops by upgrading to JKS complete rear coilover conversion for the Jeep Wrangler JL. Designed to compliment the available front coilover conversion, this rear coilover conversion takes performance to a whole new level to maximize damping capability while allowing for more suspension travel and simple tunability for any terrain. Custom valved 12” travel FOX 2.5 factory race series coilovers with piggyback DSC reservoir are mounted in place with a set of JKS upper and lower mounting brackets. These FOX 2.5 coilovers offer race proven technology with a larger 2.5” diameter body, dual rate springs, improved oil capacity, large 7/8” hard chrome plated shade and (DSC) dual speed compression adjustment technology.

The DSC allows for for 12-clicks of high speed and 10-clicks of low speed compression adjustment to dial in how the shocks performance in various terrains. These coilovers compatible with most lift kits on the market and use a threaded body allowing for preload adjustment to set ride height for between 2-5” of lift while still offering plenty of suspension travel. JKS provides bolt-on frame and axle mounting brackets to allow the use of the longer travel coilovers while optimizing ground clearance. Take your JL to the next level with this rear coilover conversion from JKS.

Specs:

    Coilover conversion offers next level performance and tunability
    FOX 2.5 Coilovers w/ piggyback DSC reservoir are specially designed for optimal performance in any terrain
    12” travel Coilovers allow for more suspension travel than others on the market
    Replacement axle mount brackets improves ground clearance and adds strength
    Extended length braided stainless steel brake lines included
    Complete Coilover conversion adjustable to work with most lift kits on the market 2-5”

In the box:

    Conversion brackets
    Frame brackets
    Extended brake line
    Fox Coilovers Reservoir

Notes:

    Aftermarket wheels with 3.5” backspacing are required for clearance
    Requires cutting/removal of factory frame mounted brackets
    2 Door models will require removing preload from coilovers to achieve a minimum 3,5" of lift