The Factor 55 Ultimate Recovery Bag has been custom designed to hold Factor 55 recovery equipment in one accessible place. The bag interior is large enough to easily hold the 2 ply standard duty tow strap 30'x2", tree saver 8', and shorty strap II. In addition, the bag retains space for winch line extensions and multiple other pieces of rigging. Five interior stash pockets can hold shackles, pulleys, Fast Fid, etc. Two exterior stash pockets provide additional storage. Four Molle loops are stitched to the top portion of the bag and can be used with Factor 55 Strap Wraps to stow recovery dampers or other equipment for quick access.

No vehicle recovery is the same. Some recoveries are simple, while others are more complicated. So Factor 55 has designed a Recovery Bag to be versatile, functional, and incredibly durable to last a lifetime of harsh conditions. The 2" Milspec riggers' webbing completely wraps around the bottom of the bag adding an additional layer of strength and support. Heavy Duty powder coated steel rings are stitched on both sides to attach a wide variety of shoulder straps (not included). Featuring Heavy Duty YKK. Zippers, each knotted with 550 Paracord, offer a longer gripping surface for ease of opening and closing the bag. Once the bag is unzipped it completely folds flat allowing easy access to all interior components. The bag interior is reinforced Cordura and is edged with binding tape. The 1000 denier blaze orange interior Cordura is perfect for quickly finding all components of your recovery gear, even in low-light conditions.

Specs:

    Especially useful in extreme terrain
    Helps free yourself from, for example, mud, snow, sand
    Proven in the toughest off-road conditions
    Well cared for, can serve for years

Recovery bag specs:

    Durable YKK zips
    Waterproof side
    Interior reinforced with Cordura in orange
    Powder coated steel shoulder strap rings
    Rectangular shape stows neatly with other gear
    Made in the USA

Recovery bag dimensions:

    Length 18"
    Height 11"
    Width ca. 8"

HitchLink

Use your receiver as a recovery tow point. The light structure is also very durable and will be perfect for the offroad use.

HitchLink specs:

    Lightweight precision CNC machined 6000 series aluminum
    Weighs only 1,9 pounds
    Rated at 9500 pounds
    Ultimate failure at 51,000 pounds
    Fits standard 2" receivers
    Fits common ¾ screw pin shackles/D-Rings
    Oxidation protection
    Color: red

Tow strap

Tow straps are designed for pulling or towing vehicles. Because towing a vehicle often results in the tow strap making contact to the ground, the abraded low energy storage tow strap will not recoil as severely if a strap failure occurs. Factor 55 tow straps are manufactured in the USA from a low stretch 100% Polyester material. 2" straps can easily fit into common 3/4" screw pin shackle openings and Factor 55 has discovered that the edges of 2" straps do not get abraded as easily as wider 3 and 4" wide straps.

Tow strap specs:

    Length 30'
    Width 2"
    Made of a low stretch polyester material
    Made in the USA

Soft shackle with rope retention pulley

Soft shackles may be used as a lightweight replacement connecting rigging for common steel screw pin shackles. The Factor 55 10" (pull to pull length) Standard Duty Soft Shackles are made in the USA under the uncompromised Factor 55 quality standards. Like all Factor 55 rigging products, these shackles have been lab and field-tested to assure consistent repeatable minimum breaking strength values. Each Standard Duty soft shackle is constructed of 7/16 diameter UHMWPE 12 strand rope similar in construction to synthetic winch lines. The RRP XTV can be used to increase pulling power or redirect the winch line. During momentary slack, patented rope retention rubber fingers prevent synthetic winch rope from escaping the pulley groove preventing premature rope failure. The oversized hole radius provides a smooth rubbing surface and keeps the legs of the soft shackle from rubbing on the edges of the RRP XTV. The critical friction surface has also been teflon treated to increase slickness and heat dissipation.

Shackle specs:

    Made of 7/16 diameter UHMWPE 12 strand rope
    Length 10"
    Replacement for steel screw pin shackles
    Made in the USA

Pulley specs:

    For synthetic rope diameters 3/16" to 1/4"
    Billet machined 6000 series aluminum
    Load capacity 12000 lbs
    Patented rope retention rubber fingers
    Made in the USA

Notes:

    Bag:
        Do NOT use detergent, harsh solvents or other harsh cleaning substances
        Do NOT wash in a washing machine
        Do NOT dry clean
        Shoulder straps not included
    Never exceed factory receiver hitch pull rating
    Always use a quality steel alloy 5/8" hitch pin
    Always pull in line with the hitch, do not bind or side load the shackle