Seal Gen2 9.5rsi

12V DC severe duty winch rated at 9,500 lb pulling meets or exceeds your expectations.
Heavy duty series wound motor equipped with thermal protection switch alters.
4 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 90 degree increments.
Both built-in digital signal two ways wireless remote control and wired water-proof remote control
Cutout switch activates or deactivates the winch.
A 12 strand construction synthetic rope coated to improve abrasion and has no water absorption.
Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
The U.S. Germany, U.K. France, etc patented mechanical cone brake outside the drum expedites heat dispersion and also makes the winch ideal for use with synthetic rope.
Meet SAE J706, CE Machinery Directive 2006/42/EC and CE Electromagnetic Compatibility Directive 2004/108/EC.

Specification/Part Numbers

Part number: PN 295860
Rated line pull: 4,309 kg / 9,500 lb single line
Motor: 3,730 w / 5.0 hp 12V series wound
Gear ratio: 3-stage planetary 159:1
Clutch (freespooling): Rotating ring gear
Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
Winch construction: Aluminum die cast housings with steel drum
Drum size: 63.5 x 227 x 273 mm (2.5” x 8.9” x 10.7")
Control: Both built-in digital signal two ways wireless remote control and waterproof remote with thermometric indicator LED w/ 5 m (17') cord
Rope type: Synthetic rope SK-75
Rope size: 10 mm x 30.5 m (3/8” x 100’)
Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
Mounting : Foot forward or foot down mounting workable
Finish : Matte black powder-coated
Winch weight (including rope) : 32 kg / 70.5 lb
Gross weight : 44.5 kg / 97.9 lb
Box dimension, (L x D x H) : 682 x 209 x 430 mm (26.8" x 8.2" x 16.9")