Factory doesn't mean better for your 392 beast

Jeep Wrangler 392 is the perfect version for anyone looking for power and driving experience. With a V8 engine that generates 470 horsepower, it's a real beast on the road. It has a factory 2" lift, but unfortunately the suspension components leave a lot to wish for. Soft springs and non-adjustable components are among its many weaknesses.
Increase the lift of your vehicle with a Overland+ suspension kit from Clayton Off Road

To go off-road and unleash the nature of your Jeep, you don't need much. The most basic modifications are to increase ground clearance and mount larger wheels. A suspension kit from Clayton Off Road will make this easy for you. Inside you will find everything you need to satisfy your requirements. The set is easy to install and due to the increased durability of materials used, it won't disappoint you. It provides ideal handling on asphalt, while providing the right toughness and performance for safe and secure off-road travel.
What can you find in the kit?

The adjustable control arms included in the kit are equipped with Giiro bushings. These are free-spinning, self-lubricating, self-centering, quiet in action and maintenance-free bushings. They make the suspension kit operate smoothly no matter what terrain the vehicle is traveling on. The use of dual rate rear springs helps prevent coilover warping at maximum camber. They have been powder-coated black to improve their corrosion resistance. The Panhard rods reduce vibrations on the road, providing a smooth and comfortable ride.

Specs:

    Manufactured in the USA
    Extremely durable materials
    Provides smooth and excellent handling on asphalt
    Increases ground clearance, gives an aggressive look
    Easy installation

Control arms specs:

    Overland+ series
    Joint to isolate road noise &, vibration
    Upper bent for tyre clearance

Coil spring specs:

    Extremely durable materials
    Powder coated black
    Provide the best in ride quality without sacrificing durability
    Handles well aftermarket bumpers and winches
    Ensures smooth and excellent on and off-road handling
    Designed to deliver trouble-free, consistent performance

Front lower control arm dimensions:

    Center to Center STOCK = 24.000"
    Center to Center MIN = 23.9375"
    Center to Center MAX = 24.880"

Front upper control arm dimensions:

    Center to Center STOCK = 20,100"
    Center to Center MIN = 19,75"
    Center to Center MAX = 21,125

Rear lower control arm dimensions:

    Center to Center STOCK = ,19,764"
    Center to Center MIN = ,19,686"
    Center to Center MAX = ,20,566"

Rear upper control arm dimensions:

    Center to Center STOCK = 17.425"
    Center to Center MIN = 17.290"
    Center to Center MAX = 18.665"

In the box:

    (2) Front upper adjustable control arm
    (2) Front lower adjustable control arm
    (2) Adjustable control arm upper rear
    (2) Adjustable control arm lower rear
    (2) Front spring
    (2) Rear ,dual rate spring
    (2) Adjustable ,sway front
    (2) Adjustable ,sway rear
    (2) Front bump stop
    (2) Rear bump stop
    Adjustable Panhard rod front
    Adjustable Panhard rod rear

Notes:

    Fits with Jeep Wrangler JL 392 models ,ONLY
    The Jeep Wrangler JL 392 has a OEM 2" lift. The ,kit adds an additional 1".