Los faros de led Intensity SOLIS se suman a la gama de faros de led de ARB con un nuevo diseño y utilizando tecnología led OSRAM, con ópticas de expansión (flood) o de profundidad (spot) e incluyen biseles intercambiables de color rojo o negro.
ARB Intensity Solis ™ has been built from the ground up at ARB headquarters in Melbourne, Australia. Headlight performance remains a priority, ensuring style and design complement the range of vehicles on the market. The optics were revamped to not only reduce flat spots (which are common with most LED driving lights), but also to place more LEDs in similarly sized exteriors, changing the LED count from 32 to 36.
The current OSRAM led array is comprised of 36 LEDs (30 x 4 W and 6 x 10 W) that provide incredible illumination on the road with a light pattern to suit a wide range of driving conditions.
TOUCH CONTROL PANEL
ARB Intensity Solis ™ wiring is sold separately (REf: ARB-SJBHARN) and includes a touch panel, with a digitally controlled dimmer. The controller comes with five preset brightness settings, to enhance the driving experience and allow you to change intensity without looking at the panel. The panel features a modern design and style and has been kept as small as possible in order to blend seamlessly into today's dashboards. Additionally, the ARB Intensity Solis ™ can be fully managed with the ARB Linx system to provide full control over your lighting system.
FEATURES:
• 36 OSRAM LEDs: 6 of 10 W and 30 of 4 W
• Gross lumens: 18,178 lm
• Effective Lumens: 9546LM Spot, 8333LM Flood
• Color temperature: 5700 Kelvin
• Distance at 1 lux: 1032m Spot, 729m Flood (1 lighthouse) and 1462m (2 Spot)
• Flood: 11 ° angle
• Spot: 6 ° angle
• Overvoltage protection
• LED lifespan of more than 50,000 hours
• Operating temperature -40 ° C to + 65 ° C, -40 ° F to + 149 ° F
• Protected against RFI / EMC interference
• Integrated thermal management
• High pressure die-cast aluminum body and bracket
• Clear, virtually unbreakable polycarbonate lens (included)
• UV stable molded polycarbonate lens cover
• Multi-position mounting
• UV resistant powder coating
• Pressure compensation breather
• Dust and waterproof to IP68
• High power Amphenol AT06 waterproof connector
• Tested to MIL810-STDG for vibration
• Meets RoHS, CE and ECE R10
• Input voltage 10-30 V DC
• Power consumption 165W
• Current draw 12.4 amps at 13.2 V
• Optional lens covers sold separately: clear, amber, and solid black
• TORX security hardware included
• Compatible with Linx - Additional hardware required (September 2020 release)
MEASURES: 225 x 220 x 120 (mm) (width x height x depth)
