New generation "Tessera Roll+" aluminium roller blind, available for Ford Ranger T6.2 (P703) 2023+ double cab. Revolutionary and futuristic design, versatility, durability, 100% handmade and with 3 years warranty on materials and workmanship.

- Easy upgrade from the "BASIC" version to the "SPRING" or "ELECTRIC" version by simply adding one of the s-Kit or e-Kit, at any time without the need for special tools or knowledge.

- Specially manufactured side rails (thickness: 5mm), with built-in "T-SLOTS" for easy and safe installation without the need to drill extra accessories such as: rollbar, cargo handles, side rails or roof racks.

- A practical and aesthetically pleasing LED bar, which can be used as auxiliary lighting, third brake light and if you have the e-KIT, as an obstacle warning flash light or emergency alarm.

- A full-length, movable white LED light bar located inside the rolling end rail that illuminates and highlights the boot bed area spotlight (regardless of the load in the boot area).

- Specially designed interior locking system with aluminium locking teeth to prevent unauthorised access. Use the strap for automatic unlocking of the Tessera Roll+ and make your daily life easier. Better protection and use at low temperatures.

- Specially designed wider, stronger and fully blade-protected slats for 100% load safety and rubber for maximum insulation.

- 2 specially designed Φ20 drainage systems with 2 overflow systems and integrated "ANTI-LEAF" technology in the drum area for complete drainage and water protection (60 litres/minute).

- An innovative rear slat design in combination with the smaller dimensions of the drum (20cm x 23cm), offers the advantage of maximising the net load capacity in both length and height.

- Specially designed box lid allows easy access and control of the Tessera Roll+.

- Heavy duty axle provides full protection in case of spring (s-Kit) or electric motor (e-Kit).

- State-of-the-art powder coating (Class 2) with fine texture and high resistance to weather conditions. The powder coating is applied in special ovens heated for 15 minutes at 190 °C.

- Easy installation on vehicles with or without bedliner. In the case of bedliner without edges or with edges, no need to trim the top of the bedliner.

- Extremely quick and easy installation, no need to drill holes in the vehicle body.

- Aerodynamic design for increased fuel economy.

Easy and simple manual opening/closing operation
REVOLUTIONARY DESIGN - UPGRADE AT ANY TIME
Simple upgrade from "BASIC" to "SPRING" or "ELECTRIC" version ONLY by adding one of our kits (S-KIT or E-KIT) according to your preference, thanks to the special design of our Quick Release Lever (QRL). By achieving this, we have managed to create a huge advantage for our B2B customers who can make a stock up to 3 times bigger, and your B2C customers can upgrade their basic version very easily and at any time without using special tools or technical knowledge.

Red LED bar & Logo
A practical and aesthetically pleasing LED bar, which can be used as auxiliary lighting, third brake light and if you have the e-KIT, as an obstacle warning flash light or as an emergency alarm.

White interior LED bar

Inside the roller shutter there is a white LED bar inside the roller shutter, which illuminates and highlights the spotlight on the loading area.

Specially fabricated side rails (5mm thick)

Specially manufactured side rails (thickness: 5mm) that follow 100% the shape and design of the pickup body bores (length and width). As a result, this offers better insulation from weather conditions and a stronger and more durable installation procedure for all types of roll bars, cargo handles, side rails and other heavy duty items. It also gives you the flexibility to combine it with OEM accessories such as rollbars.

T-rail for the installation of accessories without drilling.

The side rails incorporate T-rails for easier and safer installation without the need to drill for extra accessories such as rollbars, load handles, side rails or roof racks.

Blade-proof blades.

Specially designed wider, stronger and fully blade-protected for total load safety.

Internal Locking System (ILS)

Automatic internal locking system specially designed to prevent unauthorised access, softer and easier to use in low temperatures.

Aluminium locking teeth (ALT)

The only roller shutter with automatic closing teeth in aluminium (not plastic) for maximum load safety.

Sealed and waterproof

ELECTRIC MOTOR AND SPRING (DDS)
Located and protected inside the heavy duty aluminium centre beam. The only shutter that TAKES NO EXTRA SPACE in the cargo area of the pick-up (available only with S-KIT & E-KIT).
MAINTENANCE-FREE (DTS)
in the Dynamic Transmission System (DTS)

Side drains in the rails

Two specially designed large drains integrated into the side rails.

Two main drains inside the roller shutter box.

Two specially designed oversized Φ20 drains with 2 overflow systems inside the roller shutter box, tested to last even in the most extreme weather conditions (60 litres/min).

The exclusive Anti-Leaf System (ALS) - Anti-Leaf System.
The world's only roller shutter with an anti-clogging system (anti-leaf system) to protect the drains from leaves and debris.

Our surface - our shield
Specially designed sheets with integrated silicone gasket for the best protection on rainy days.

Perfect protection
It provides the perfect protection for all types of weather and climate conditions thanks to the combination of sealed side rails together with our specially designed blades.

Easy access to the roller shutter box at any time
Specially designed roller shutter box cover to allow access and control of your Tessera Roll+.

Maximum load capacity

An innovative design of the rear cross member in combination with the smallest roller shutter box (20cm x 23cm) offers the advantage of maximising the net load capacity in both length and height.

Clearance height
The Tessera Roll+ continues its legacy (from the Tessera4x4 Roll SOT-ROLL series) and sits on the edge of your pickup's body, giving you more headroom under the shutter.

Robust & Durable Shaft ,Heavy Duty

We have become even faster

Extremely quick and easy installation, without the need to drill holes in the vehicle body (drilling is necessary for the installation of certain extra accessories such as roll bars, side bars, load bars, etc. for heavy-duty applications).

BEDLINER? NO PROBLEM

It can be easily installed on vehicles with or without a bedliner. In this case, it is very easy to install next to a bedliner with or without edges, without the need to trim the top of the bedliner.

Our latest generation powder-coat finish

New generation of super durable fine textured powder-coat finish. Due to its high resistance to ageing (3 years in Florida), it is a recommended finish for architectural and other demanding applications where gloss, colour retention and long-term aesthetics are of significant importance.
SUPERIOR SPECIFICATIONS:
✓ Exceptional abrasion resistance.
✓ Increased chemical resistance.
✓ Low sensitivity to contamination.
✓ Supreme edge and edge coverage reducing the risk of corrosion.
✓ Stable structure in different film thicknesses.
High transfer efficiency and very good penetration for difficult areas.
✓ High adhesion due to low density.
✓ All PP 600 Ammos products are free of TGIC and heavy metals.
✓ PP600 Ammos is a QUALICOAT approved product for Class 2- Category 1 (Approval number: P-0780).
✓ Neokem employs environmental and quality management systems certified to: ISO 9001:2015 and ISO 14001:2015.
✓ PP 600 Ammos is applied at a thickness of 60-100 microns by electrostatic spray or trio-charging equipment to ensure full coverage and colour homogeneity.
Curing of the powder occurs in a suitable convection oven for 15min at 190 °C.

Aerodynamics for improved fuel economy

Contributes to vehicle aerodynamics and overall driving experience especially at high speeds or on windy days. It also offers more favourable fuel efficiency.