The covers are sold individually, so to cover the two front seats you will need two units.

Do you want to protect the seat of your camper van, motorhome, tourism or 4x4, in addition to giving it a new look? The Glassy waterproof camper cover is your solution in any of its versions or designs. This individual version adapts perfectly to most passenger car and camper van seats such as Fiat Ducato, Peugeot Boxer, Citroën Jumper, Volkswagen (T3, T4, T5, T6) and Crafter, Mercedes Vito and Sprinter, Renault Traffic, Nissan Primastar, Ford transit, etc, with the exception of seats that have the seat belt integrated in the upper part, as in some models of motorhomes or Hymer-type seats. (consult in case of doubt).

As for the fabric, we have achieved a balance between impermeability and breathability, giving our camper seat cover a resistance of up to 1,000 columns of water thanks to its PV interior, which also prevents breakage due to exposure to the sun. This finish does not create a total screen between the seat and your body, which allows air to circulate.

By not creating a total screen, we favor breathability, so we do not recommend riding very wet (wet neoprene) for long periods of time, since due to the pressure, there is a possibility that the water will filter very little by little.

We have different designs that adapt to the most conservative and the most daring clients. With the Glassy covers, in addition to protecting the seats, you will give a new look to your camper van, motorhome or tourism.

1º Place the cover as if it were a sock, and insert the rigid piece that you will find inside the cover, between the backrest and the seat.

2º If your seat has armrests, insert them through the side openings, and the backrest adjustment wheel through the circular opening. Finally, pull the tensioner that you will find at the bottom of the cover to adjust it and prevent it from moving.

*This cover is not approved for seats with side airbags