Characteristics:
DINITROL RC 900 is a Rust Converter with an organic chelat complex base and epoxy resin. DINITROL RC 900 actively converts rust on substrates into a stable organic iron complex. Once the product is dry, an impermeable barrier against further corrosion is formed. DINITROL RC 900 penetrates rust 7−10 times deeper than standard rust converters. DINITROL RC 900 forms a dry and strong adhesive film which is suitable as a base for paintwork and other corrosion protection products.
Areas of Application:
DINITROL RC 900 has been developed for use on oxidised iron parts.
Method of Use: Remove rust, grease and dirt with a wire brush, sand paper or a sandblasting process. Rust and scale may only be visible as slight shading. In additi on to rust, the steel must also be free from dust and grease. Carefully clean with acetone or lacquer thinner. Shake the spray can well. The product should be applied in several successive coats, at a distance of approx. 25 cm. The metal tempera-ture should not be below 10°C. The material is dust-dry after one hour; if necessary, a further coat
can be applied.