VIAIR’s Constant Duty Onboard Air System is a pre-packaged compressed air solution that provides a 100% duty cycle 450C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires.
Included Parts
- 2.5 Gallon VIAIR Air Tank
- 450C VIAIR Compressor
- 35ft. Coil Hose
- 1/4” NPT Quick Connect Stud (F)
- 1/4” NPT Quick Connect Coupler (M)
- Dash Panel Gauge with ON/OFF Switch
- Pressure Switch with Relay (110 PSI on, 150 PSI off)
- Reducer (1/8” NPT F to 1/4” NPT M)
- 1/4” NPT 175 PSI Safety Valve
- 1/4” NPT Drain Cock
- (3) 1/4” NPT Compression Fittings
- 4” Strip of Continuous Grommet Material
- 20ft. 12-Gauge Wire with Inline Fuse Holder
- Electrical Connections
Specifications
12-Volt
Permanent Magnetic Motor
Duty Cycle: 100% @ 100 PSI
Max. Working Pressure: 150 PSI
Max. Amp Draw: 19 Amps
Air Tank Temperature Rating: -40°C ~ +80°C
Air Tank Temperature Rating: -40°F ~ +176°F
PSI | CFM | A | BAR | LPM | A |
---|---|---|---|---|---|
0 | 1.80 | 12 | 0 | 51.0 | 12 |
10 | 1.75 | 14 | 1.0 | 47.6 | 15 |
20 | 1.60 | 16 | 2.0 | 43.3 | 17 |
30 | 1.52 | 17 | 3.0 | 38.2 | 18 |
40 | 1.39 | 18 | 4.0 | 34.0 | 19 |
50 | 1.27 | 19 | 5.0 | 30.5 | 20 |
60 | 1.18 | 19 | 6.0 | 28.1 | 21 |
70 | 1.09 | 20 | 7.0 | 26.4 | 22 |
80 | 1.04 | 20 | 8.0 | 25.0 | 23 |
90 | 0.97 | 21 | 9.0 | 23.0 | 22 |
100 | 0.94 | 22 | 10.0 | 21.0 | 21 |
110 | 0.90 | 23 | |
||
120 | 0.86 | 23 | |
||
130 | 0.81 | 22 | |
||
140 | 0.76 | 21 | |
||
150 | 0.72 | 20 | |
* Supply Voltage: 13.8 Volts
2.5 Gallon Tank | Fill Rate |
---|---|
0 to 145 PSI | 3 min. 02 sec. (± 10 sec.) |
110 to 145 PSI | 59 sec. (± 05 sec.) |
35″ x 12.5″ | Fill Rate |
0 to 30 PSI | 6 min. 55 sec. (± 15 sec.) |
15 to 30 PSI | 3 min. 30 sec. (± 10 sec.) |
37″ x 12.5″ | Fill Rate |
0 to 30 PSI | 7 min. 56 sec. (± 15 sec.) |
15 to 30 PSI | 4 min. 09 sec. (± 10 sec.) |
RV Tires 275/80r22.5 | Fill Rate |
80 to 90 PSI | 49 sec. (± 05 sec.) |
90 to 110 PSI | 5 min. 07 sec. (± 10 sec.) |
110 to 130 PSI | 6 min. 19 sec. (± 15 sec.) |