Utilizamos cookies propias y de terceros para mejorar la experiencia de navegación, y ofrecer contenidos de interés. Al continuar navegando entendemos que se acepta nuestra política de cookies Aceptar

News » ¿ Do you have a PANDA 4x4 ?

Apr 26, 2019 - 00:29 panda-raid,-panda-4x4-,-panda-sisley-,-panda-marruecos 4942

Please see this ...

¿ Do you have a PANDA 4x4 ?


If you have just arrived to participate in a competition in Morocco such as the Panda Raid or the Maroc challenge and you are thinking of improving your car a bit to get more prepared, this is your section.

In this report we are going to focus on how to prepare a PANDA 4x4, but it is also applicable to many other cars. Remember that to see the accessories of each car the fastest is to press CLICK and select your car model.

START ....

SUSPENSIONS :

We can start install a lifting kit:

With this kit we replace the front springs get an elevation of + 3.5cm and in the rear part we put some blocks to separate the crossbow from the axle.
We maintain the comfort of origin, but increasing the height of the car.

The price is 178 € , here we leave the link in case you want to buy it.  BUY NOW.


If you want to improve we must go to this high-end kit, with high-level parts for our Panda 4x4. With this kit we replace the front shock absorbers by ones with threaded body and inverted stem getting a custom elevation (since being adjustable you can raise or lower the spring to your liking) and in the back we put a large diameter absorbers capable of absorbing any irregularity of the terrain.

To get the height of the rear bridge we will put spacers in the crossbows to get an elevation of about 3.5 cm.

The price is 1560,90 € , here we leave the link in case you want to buy it. COMPRAR AHORA.


BASTIDOR :

CWhen we improve suspensions in a McPherson type suspension vehicle it is recommended to install a turret bar to keep the chassis in place.
We have to think that a suspension of better quality will allow to face curves at higher speed and the part where it is anchored the shock absorber will suffer more effort.

That's why the ideal thing is to solve this problem by mounting a bar of turrets on the upper part of the shock absorber. If you look at the photograph the bar is only responsible for keeping the turrets in the original position and prevent them from breaking.

The price of the bar is 108.90 € and you can BUY HERE



SNORKEL :

The high shots have always been mounted by the cars that have participated in Raids because it reduces the entry of dirt into the air filter and always sucks cleaner air.
Although the advantages do not end here because with the snorkel we improve the Wading capacity.

Although there is no specific Snorkel for PANDA, this model can be adapted and it looks really good.

The price is € 145.20 and you can BUY NOW.



SKID PLATES :

The underside of the vehicle is a very important part and we recommend protecting them to the maximum, it is not the first time that we have to leave early due to a breakage of the crankcase by a stone or because of a branch.

In our car we have several protectors, both in STEEL (they weigh a little more but they resist the blows better and allow to straighten them) as in DURALUMINIO (it weighs less but its price is higher).

For the panda we have a protective cover (covers the main under the engine) and we can also put an extension of the front that protects and reinforces the skirt.
We also have the deposit protector.

If we choose the steel version these are the prices:

Front protractor: 48.40 €
Cover: 299.11 €
deposit protector: € 133.10

If we want them in Duraluminium, the cost will increase compared to steel ones (+ € 281.69).

But you can go to the product page to see all the information. DATA PRODUCT.



BRAKES DISCS :

Improve the performance with these leaky brakes, the price of the couple is 145.20 € and when drilled will allow you to maintain more intense braking.

Click HERE for see all information.






WHEEL SPACERS :

One of the best options to gain stability is to install wheel spacers, for PANDA we have separators specially designed to withstand the toughest conditions.
They move the wheels + 2 centimeters per side, they have double centering and they are includes the hardware to ensure proper operation.

They are made of Aluminum to weigh the minimum but resisting the most and the price for the 4 separators is 169,16€ . BUY HERE.



ROLL BARS :

The inner bars are an insurance in case of accident, being fixed to the body improve the rigidity of the set improving the sensations in fast track.
For PANDA we have 3 models of anti-roll bars: < div>
4 Points: They protect from the middle of the car backwards, it is a triangle type like the one the roadster carries and the main advantage is the ease of installation what's wrong with it.
The price is 477.95 €

6 Points: It's the same as the 4-point version but we add 2 more points that make the bow reach the front protecting the driver and co-driver directly.
The price is 665.50 € < / b>

6 Points + Doors: It is the same version as the previous one but it includes a bar diagonally avoiding that the door between inside the passenger compartment in the event of a rollover.
The price is 719,95€





We hope you liked it, soon we will make recommendations with the necessary and recommended material to go to one of these amateur competitions.

Thanks for your time.